ELECTRIC EQUIPMENT & AUDIO SYSTEM
MAXONIC
MAXONIC
History
Unit
Speaker
Amplifier
SLC-021
SD-013
SD-015
Cable
Contact us
TOP > Maxonic > Amplifier
AMPLIFIER
SIT Line controller
SLC-021
SIT O.P.T Power Amplifier
SPEC
Formation 3 Input (Unbalance / Imp.50kΩ)
1 Output (Unbalance / Imp.150Ω)
Supply voltage AC100~230V
Power consumption 13W
Dimensions 360W×140H×360D mm
Weight 10kg
SIT O.T.L Power Amplifier
SD-013 ( Discontinue , Only stock )
SIT O.T.L Power Amplifier
SPEC
Rated Output 100W+100W(8Ω)/ Stereo
Frequency response 20Hz~20kHz
THD Less than 0.1% (20Hz~20kHz)
Supply voltage AC100~230V
Power consumption 200W
Dimensions 430W x 197H x 363D mm
Weight 42kg
V/Tube & SIT O.T.L Power Amplifier
SD-015
SIT O.T.L Power Amplifier
SPEC
Rated Output 50W+50W(8Ω)/ Stereo
Frequency response 20Hz~100kHz
THD Less than 0.1%(20Hz~100kHz)
Supply voltage AC100~230V
Power consumption 200W
Dimensions 370W x 165H x 440D mm
Weight 13kg

NEW RELEASE

V/Tube & SIT O.T.L Pre-Main Amplifier
SD-016
SPEC
Rated Output 50W+50W(8Ω)/Stereo
Frequency response 20Hz~100kHz
THD Less than 0.1%(20Hz~100kHz)
Supply voltage AC100~230V
Power consumption 200W
Input 1~3 Unbalanced / Line Input
Input 4 Unbalanced / External Pre-Amplifier
Circuit composition Non-NFB , ClassAB
Dimensions 430W × 363D × 197H (mm)
Weight 22kg
Catalog(PDF)
SIT (Static Induction Transistor)
The sole, pure Japan-born semi-conductor developed by Dr. J. Nishizawa, ex-president of Tohoku University and world-known authority of metal engineering which utilises induction effects of statics makes it possible to treat large current under low electricity consumption : Its reduction capability of channel resistance to the absolute minimum assures low inner resistance, high speed and low energy loss, thus realising signal amplification totally faithful to signal wave-forms. SIT O.T.L Power Amplifier
Feature
1. Inherent characteristics common to those of direct-heated triode valves help lower odd numbered THD.
2. Equal-μ characteristics offering superb linearity reduce voltage amplification distortion.
3. Large voltage amplification ratio ensures low-voltage operation.
4. Excellent treble characteristics extend gain bandwidth, thus lowering phase distortion.
5. Intrinsic low noise removes additional inner-generated amplification noise.
6. Low output impedance affords good transformer output.
7. Semi-permanent lifetime eliminates time-lapse deterioration.
8. Strong resistance to heat generation makes amp hard to burn, thus keeping basic performances unchanged even under fluctuations of ambient temperature and free from sonic degradation.
PAGE TOP
Copyright© 2008-2011 SRC Co.,Ltd. All Rights Reserved.